Set up your Brother machine on a wireless network

To set up your Brother machine on a wireless network: 

1) Connect the power cord to your Brother machine and then connect it to an electrical socket. Turn your Brother machine on. 

2)  Press Menu button on the machine's control panel. 

3) Press the Up or Down arrow key to select Network and press OK.

4)  Press the Up or Down arrow key to select WLAN and press OK. (This step may not apply to all machines.) 

5)  Press the Up or Down arrow key to select Setup Wizard and press OK. 

6)  When WLAN Enable? appears, select Yes to enable the wireless network. This will start the wireless setup wizard. 

7)  The machine will search for your network and display a list of available Network Names (SSIDs). When a list of SSIDs appears, press the Up or Down arrow keys to select the SSID you wrote down earlier, and then press OK.

8) If using an authentication and encryption method that requires the Network Key (Password) Enter the Network Key, then press OK to apply your settings. Select Yes to apply the settings.

 If your authentication method is Open System and your encryption mode is None Go to the next step. 

9) The machine tries to connect to the wireless network you have selected.

If your Brother machine connected successfully

The machine's LCD displays Connected.

The machine will print a wireless connection report.

If the connection failed

The machine will print a wireless connection report. Check the error code on the printed report.